体育外围

  • 1
  • 2
产品详细
    分享到:
    点击次数:1974  更新时间:2019-03-11   【打印此页】  【关闭
    详细介绍:

    RENLIANSHIBIESHEXIANGTOUMOZU ANZHUOYITIJISHIBIESHEXIANGTOUMOZU ZHICHIWINDSXITONGYIJIANZHUOXITONGPINGTAI GAOQING GAOZHENLV

    USB  Camera

                

    KEHUMINGCHENGCustomer Name:/

      

    XING   HAOModel:XHY-C003-0580

    RI   QIDate:2018-8-23

    QUERENHUIQIANApproved:

    NEI   RONG  CONTENT 

    1、 目的             Purpose             

    2、 效力             Effect

    3、 技术参数         Technical parameters

    4、 外观尺寸         Shape and Dimensions

    5、 镜头结构         Lens Construction

    6、 功能检验标准     Function inspection criteria

    7、 外观检验标准     Visual inspection criteria

    8、 可靠性测试       Reliability Test

    9、 包装要求         Packaging requirements

    10、其他             Other

    版本Version编写Compile审核Auditing批准Authorize

    V1.0张金畅张金畅朱中文

    YI、MUDE(Purpose)

    WEILEQUANMIANDIMIAOSHUJISHUHEZUOZHONGSUOZHIDEJISHUGUIGE,TONGCHANGXUYAOYOUYIZHENGTAOWENJIANYUYIBIAOSHI。ZUOWEIQIZHONGDEYIBUFEN

    ,BENJISHUGUIGEGUIDINGLESHEXIANGTOUMOZUYINGDADAODETEDINGJISHUGUIGE,DUIYUGAIXINGHAOHUOPINJUYOUYUESHULI。

    For a comprehensive description of technical cooperation referred to the technical 

    specifications, usually a set of documents required by the express. As one part of the 

    technical specifications of the  provides camera modules should meet the specific 

    technical specifications for the goods model binding.

    ER、XIAOLI(Efficacity)

    RUGUOBENGUIFANYUGAILEIHUOPINDETONGYONGJISHUGUIGESHUZHONGDEGUIGEBUYIZHISHI,YIBENGUIGESHUZHONGDEGUIDINGWEIZHUN。

    If the norms of such goods with a common technical specifications of the specification 

    book is inconsistent to the specifications book shall prevail.

    SAN、JISHUCANSHU(Technical parameters)

    项目(Items)参数 (Parameters)

    感光片(SENSOR)IMX179

    感光片尺寸(Lens Size)1/3.2”

    最高有效像素(Most effective pixels)3264H x 2448V

    数据格式 (Data Format) MJPG/YUY2

    像素大小 (Pixel Size)1.4*1.4μm

    宽动态范围(dynamic range)/

    镜头(Lens)视角FOV :D=  74.6°

    光学总长Optical length :4.47

    结构 lens construction:5p

    接口mount :M6.5*P0.25

    对焦focusingAF

    帧  速 (Frame rate) 30fps

    自动控制 (auto control)饱和度(Saturation),对比度(Contrast),锐度(acutance),白平衡 

    (White balance),PUGUANG(exposure)。

    音频(audio)高品质数字MIC,单通道

    供电电压(Voltage)DC 5V

    最大工作电流 (working current)MAX 300mA

    USB接口(USB Connector)USB2.0

    储存温度 (Storage Temperature)-20C to +70C

    工作温度 (working Temperature)随环境温度而变化

    JIANRONGXITONG 

    (system compatibility)1、Windows XP(SP2,SP3)、Vista 、7、8、10  Android system

    2、Linux or OS with UVC driver 

    SI:CHICUNWAIGUANAppearance Dimension

     

    WU:JINGTOUCANSHULens Specifications

     

    LIU、GONGNENGJIANYANBIAOZHUN (Function inspection criteria)

    (YI)GONGNENGDINGYI:

        1.SHEXIANGTOUMOZUDIANQIXINGNENG、TUXIANGZHILIANG。(Electrical properties , the quality of image. )

    (二)检验方法:( Inspection methods)

    1. RENYUAN: WAIGUANJIANCHARENYUANXUJINGGUOPEIXUNBINGQIEBIANSENENGLIZHENGCHANG,QISHILIYINGDADAO1.0YISHANG(JIAOZHENGHOUDADAO1.0YISHANG

    YIKE),BIANSENENGLIYINGKETONGGUOBIAOZHUNCESHI。

    Staff: The appearance of the inspectors to be trained and the capacity of normal color 

    vision, Its vision to achieve more than 1.0 (after correction can also be reached more 

    than 1.0), Color vision capability should be available through standard tests.

       2. GONGJU:LIANJIEDIANNAO,YONGAmcap CESHIRUANJIANJIANCETUXIANG。

         Tool: Connect the computer, Testing images with Amcap software.

    3. JULIHESHIJIAN: GUANCHAJULIWEI30  55cm,GUANCHASHIJIANWEIMEIGEMIAN3  5MIAO。

    Distance and Time: Observation distance: 30  55cm, 

    Observation time for each surface: 3  5seconds

    4. JIANYANHUANJING: WAIGUANJIANYANYINGZAIBUCIMUDEYINGGUANGDENGXIAJIANCHA,QIZUIDIZHAODUYINGZAI100CHIZHUGUANGLIANGDUYISHANG,HUOZHESHI

    60WRIGUANGDENG,1.5mJULIXIAJIANYAN。

         Test condition: Visual inspection should be conducted under anti-glare 

    fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp 

    of 1.5m distance.

    (三)接受标准 (Accept criteria)

    1.图像无花屏、彩屏、变色。(The image has no mess, color screen and 

    discoloration.)

    2.无白点、黑点、脏污、暗角。(There is no white spot, black spot, dirt or dark 

    angle in the image.)

    3.图像清晰,四周清晰度一至。(TThe image is same clear on all cornors)

    QI、WAIGUANJIANYANBIAOZHUN  (Visual inspection criteria)

    (一)外观表面定义:( The appearance of the definition)

    1.摄像头模组的外观  (Camera module appearance)

    (二)检验方法:( Test methods)

    1.人员: 外观检查人员需经过培训并且辨色能力正常,其视力应达到1.0以上(矫正后达到1.0

    YISHANGYIKE),BIANSENENGLIYINGKETONGGUOBIAOZHUNCESHI。

    Staff: The appearance of the inspectors to be trained and the capacity of normal color 

    vision, Its vision to achieve more than 1.0 (after correction can also be reached more 

    than 1.0), Color vision capability should be available through standard tests.

    2.距离和时间: 观察距离为50  75cm,观察时间为每个表面3  5秒。

    Distance and Time: Observation distance: 50  75cm, 

    Observation time for each surface: 3  5seconds

    3. JIANYANHUANJING: WAIGUANJIANYANYINGZAIBUCIMUDEYINGGUANGDENGXIAJIANCHA,QIZUIDIZHAODUYINGZAI100CHIZHUGUANGLIANGDUYISHANG,HUOZHESHI

    60WRIGUANGDENG,1.5mJULIXIAJIANYAN。

           Test condition: Visual inspection should be conducted under anti-glare 

    fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp 

    of 1.5m distance.

    4.GUANCHAJIAODU: GUANCHAJIAODUZAI40  50ZHIJIAN。

      Observation angle: Observation angle between 40  50.

    (三)接受标准 (Accept criteria)

    1.清洁程度:部件必须无污点、无尘、无油脂及无其它污迹。由于运输材料造成的污迹如果

    NENGGOUCHUIQUHUOMOQUZESHIKEYIJIESHOUDE。

    The degree of Cleanliness : Components must not stain, clean, no grease and other 

    stains. Because of s s stains caused by the transport of materials can  erased , it 

    is acceptable.

    2.装配表面:需装配的零部件应避免有划痕、凿痕、凹痕、弯折、破裂、压痕、擦伤或其它

    YINBUDANGZHUANGPEISUOYINQIDEQUEXIAN。

           Assembly surface: Assembly of parts and components required to have scratches 

    should be avoided, dent, bend, break down, Indentation, scratches or other improper 

    assembly defects.

    BA、 KEKAOXINGCESHI (Reliability Test)

    项目Items条件Condition规格Specification

    GAOWENSHIYAN

    High Temperature Test温度(Temp):60℃

    时间(Time):96H无异常No abnormal

    DIWENSHIYAN

    Low Temperature Test温度(Temp):-20℃

    时间(Time):96H无异常No abnormal

    SHIDUSHIYAN

    Humidity Test温度(Temp):60℃

    SHIDU(Humidity):80-85%

    时间(Time):24H无异常No abnormal

    JINGTOUZUOLALISHIYAN

    Cable Tensile Strength Test荷重:4KG

    持续时间:60秒无异常No abnormal

    DIELUOCESHI(DANTI)

    Drop Test高(High):60CM

    HUISHU:10CI

    木板上电性能正常

    Electric normal

    DIELUOCESHI(ZHENGXIANG)

    Drop Test高(High):60CM

    YIJIAOSANBIANLIUMIAN

    木板上电性能正常

    Electric normal

    ZHENDONGCESHI(DANTI)

    Vibration Test1.震动机的震动频率调至50Hz;

      Vibration machine vibration  frequency to 50Hz

    2.ZHENDONGFUDUVibration amplitude  1.5MM;

    3.震动时间Vibration time 30 Minutes电性能正常

    Electric normal

    BACHASHIYAN

    USB connector回数:25回电性能正常

    Electric normal

    JIU.BAOZHUANGYAOQIU(Packing Request) 

    1、CHANPINYINGYANGEGENJUCHANPINTEDIANZHIDINGXIANGYINGDEBAOZHUANGBIAOZHUNBINGZUNZHAOZHIXING,YIBAOZHENGCHANPINGUIDINGSHIYONGHECHUCUNQINEI,

    DADAOFANGJINGDIAN、FANGSHI、FANGZHEN、FANGMEI、FANGYEMANZHUANGXIEDENGBIAOZHIJIXIANGGUANBAOZHIYAOQIU。

    Products should be strictly in accordance with the characteristics of the development 

    of the corresponding Product packaging standards and in compliance with the 

    implementation, guarantee the use and storage of products during the period, reaching 

    anti-static, moisture, shock-proof, mildew, anti-barbaric handling related signs and 

    shelf-life requirements.

    2、CHANPINWAIBAOZHUANGSHANGYINGBIAOMING:GONGFANGMINGCHENG/BIAOZHI、CHANPINXINGHAOGUIGE、NEIZHUANGSHULIANG、SHENGCHANRIQI/PIHAOHEDINGDANHAO。

          Product packaging should be marked: Supply-side name / logo, Product Model 

    specifications, containing the number, production date / batch number and order 

    number.

    3、BAOZHUANGJIZHUANGXIANGFANGANYIJUKEHUYAOQIU,YOUSHUANGFANGXIESHANGJUTIXIJIE,YIFENGYANGWEIZHUN。

          Packaging and packing programs based on customer requirements, specific details 

    of consultations by both parties, to finished products as the standard.

    SHI.QITA(Others)

    1.BENCHENGRENSHUDEGENGGAIXUJINGSHUANGFANGQUEREN,RENHEYIFANGDANDUXIUGAIWUXIAO。

         The recognition of the need to change the book recognized by both parties, either 

    party to amend a separate as null and void.

    2.BENCHENGRENSHUZAIKEHUSHOUDAODEQIGEGONGZUORINEI,BIXUQIANZHANGFANHUI,YUQISHIWEIMOREN。

        Admit in the book the customer received within seven working days, must return 

    signature, late regarded as the default. 

上一条:电脑摄像头   
排队机厂家,人脸识别闸机设备品牌定制开发,钢制多媒体讲台批发价格,摄像头模组哪个牌子好
版权所有:深圳市轩好韵电子有限公司      电脑版  手机版